Servo Motor & Driver Panasonic
รุ่น MADHT1505E / MSMD012G1V
(Used 90%) สภาพสวยเหมือนใหม่
MADHT1505E 10,000
MSMD012G1V 8,000
MSMD012G1V
Spec Detail
|
Item |
Specifications |
|
Part Number |
MSMD012G1V |
|
Details |
Low inertia, Lead wire type, IP65 |
|
Family Name |
MINAS A5 |
|
Series |
MSMD Series |
|
Type |
Low inertia |
|
Enclosure |
IP65 |
|
About Enclosure |
Except rotating portion of output shaft and leadwire end. |
|
Environmental Conditions |
For more details, please refer to the instruction manual. |
|
Flange sq. dimension |
38 mm sq. |
|
Flange sq. dimension (Unit:mm) |
38 |
|
Motor lead-out configuration |
Lead wire |
|
Motor encoder connector |
Lead wire |
|
Power supply capacity (kVA) |
0.5 |
|
Voltage specifications |
200 V |
|
Rated output |
100 W |
|
Rated current (A (rms)) |
1.1 |
|
Holding brake |
with |
|
Mass (kg) |
0.68 |
|
Oil seal |
with |
|
Shaft |
Key-way, center tap |
|
Rated torque (N ⋅ m) |
0.32 |
|
Momentary Max. peak torque (N ⋅ m) |
0.95 |
|
Max. current (A (o-p)) |
4.7 |
|
Regenerative brake frequency (times/min) |
Without option :No limit
With option :No limit
Option (External regenerative resistor) Part No. : DV0P4281 |
|
About regenerative brake frequency |
Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
|
Rated rotational speed (r/min) |
3000 |
|
Rated rotational Max. speed (r/min) |
5000 |
|
Moment of inertia of rotor ( x10-4 kg ⋅ m²) |
0.054 |
|
Recommended moment of inertia ratio of the load and the rotor |
30 times or less |
|
About recommended moment of inertia ratio of the load and the rotor |
Please refer to the details of [Motor Specification Description] ,Note: 3. |
|
Rotary encoder: specifications |
20-bit Incremental system |
|
Rotary encoder: Resolution |
1048576 |
Brake specifications
|
Item |
Specifications |
|
Static friction torque (N ⋅ m) |
0.29 or more |
|
Engaging time (ms) |
35 or less |
|
Releasing time (ms) |
20 or less |
|
Exciting current (DC) (A) |
0.3 |
|
Releasing voltage (DC) (V) |
1 or more |
|
Exciting voltage (DC) (V) |
24 ± 1.2 |
|
About brake specifications |
This brake will be released when it is energized.
Do not use this for braking the motor in motion.
Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4. |
Permissible load
|
Item |
Specifications |
|
During assembly: Radial load P-direction (N) |
147 |
|
During assembly: Thrust load A-direction (N) |
88 |
|
During assembly: Thrust load B-direction (N) |
117.6 |
|
During operation: Radial load P-direction (N) |
68.6 |
|
During operation: Thrust load A, B-direction (N) |
58.8 |
|
About permissible load |
For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
